Soil observation and leaf area index and aboveground biomass of maize sampling points in Yingke Daman area of Heihe River Basin (2012)

The experimental data of Yingke Daman in Heihe River Basin is supported by the key fund project of Heihe River plan, "eco hydrological effect of agricultural water saving in Heihe River Basin and multi-scale water use efficiency evaluation". Including: soil bulk density, soil water content, soil texture, corn sample biomass, cross-section flow, etc Data Description: 1. Sampling location of Lai and aboveground biomass: Yingke irrigation district; sampling time: May 2012 to September 2012; Lai and aboveground biomass of maize were measured by canopy analyzer (lp-80), and aboveground biomass was measured by sampling drying method; sample number: 16. 2. Soil texture: Sampling location: Yingke irrigation district and Shiqiao Wudou Er Nongqu farmland in Yingke irrigation district; soil sampling depth is 140 cm, sampling levels are 0-20 cm every 10 cm, 20-80 cm every 20 cm, 80-140 cm every 30 cm; sampling time: 2012; measurement method: laboratory laser particle size analyzer; sample number: 38. 3. Soil bulk density: Sampling location: Yingke irrigation district and Daman irrigation district; sampling depth of soil bulk density is 100 cm, sampling levels are 0-50 cm and 50-100 cm respectively; sampling time: 2012; measurement method: ring knife method; number of sample points: 34. 4. Soil moisture content: this data is part of the monitoring content of hydrological elements in Yingke irrigation district. The specific sampling location is: Shiqiao Wudou Er Nongqu farmland in Yingke Irrigation District, planting corn for seed production; soil moisture sampling depth is 140 cm, sampling levels are 0-20 cm every 10 cm, 20-80 cm every 20 cm, 80-140 cm every 30 cm Methods: soil drying method and TDR measurement; sample number: 17. 5. Cross section flow: Sampling location: the farmland of Wudou Er Nong canal in Shiqiao, Yingke irrigation district; measure the flow velocity, water level and water temperature of different canal system sections during each irrigation, record the time and calculated flow, monitor once every 3 hours until the end of irrigation; sampling time: 2012.5-2012.9; measurement method: Doppler ultrasonic flow velocity meter (hoh-l-01, Measurement times: Yingke irrigation data of four times.

0 2020-07-30

Soil observation data of typical sample points in Heihe River Basin (2012-2014)

The data set contains soil observation data of typical sample points in Heihe River Basin: pH value and soil texture 1. Soil pH value: longitude, latitude and pH value of typical soil sample points. 2. Soil texture: including soil texture data of typical soil samples in Heihe River Basin from July 2012 to August 2013. The typical soil sampling method in Heihe River Basin is representative sampling, which means that the typical soil types in the landscape area can be collected, and the representative sample points should be collected as far as possible. According to the Chinese soil taxonomy, soil samples from each profile were taken based on the diagnostic layers and diagnostic characteristics.

0 2020-07-30

Spatial distribution data of soil bulk density, irrigation experiment and field water holding capacity in Linze Pingchuan irrigation area of Heihe River Basin (2012)

In the transition zone from Heihe River to desert oasis in Pingchuan oasis of Linze, soil texture, bulk density, field capacity, saturated water capacity, soil organic matter, total nitrogen and inorganic carbon content were studied. PH value, electrical conductivity, total carbon, SiC and C / N were monitored to determine the physical and chemical properties of 0-20cm topsoil and the soil particle size composition of 0-20cm and 20-80cm soil layers. According to the soil properties of five different soil in cotton field, cotton irrigation experiment was carried out: irrigation amount, seed cotton yield, straw parameters, lint percentage, coat index, seed index, single boll weight, flower rate before frost, unit boll number, single boll weight, irrigation water productivity, etc.

0 2020-07-30

The HWSD soil texture dataset of the Shulehe River Basin (2009)

The data set is the HWSD soil texture dataset of the Shulehe River Basin. The data comes from the Harmonized World Soil Database (HWSD) constructed by the Food and Agriculture Organization of the United Nations (FAO) and the Vienna International Institute for Applied Systems (IIASA). Version 1.1 was released on March 26, 2009. The data resolution is 1km. The soil classification system used is mainly FAO-90. The main fields of the soil attribute table include: SU_SYM90 (soil name in FAO90 soil classification system) SU_SYM85 (FAO85 classification) T_TEXTURE (top soil texture) DRAINAGE (19.5); ROOTS: String (depth classification of obstacles to the bottom of the soil); SWR: String (soil moisture characteristics); ADD_PROP: Real (a specific soil type related to agricultural use in the soil unit); T_GRAVEL: Real (gravel volume percentage); T_SAND: Real (sand content); T_SILT: Real (silt content); T_CLAY: Real (clay content); T_USDA_TEX: Real (USDA soil texture classification); T_REF_BULK: Real (soil bulk density); T_OC: Real (organic carbon content); T_PH_H2O: Real (pH) T_CEC_CLAY: Real (cation exchange capacity of cohesive layer soil); T_CEC_SOIL: Real (cation exchange capacity of soil) T_BS: Real (basic saturation); T_TEB: Real (exchangeable base); T_CACO3: Real (carbonate or lime content) T_CASO4: Real (sulfate content); T_ESP: Real (exchangeable sodium salt); T_ECE: Real (conductivity). The attribute field beginning with T_ indicates the upper soil attribute (0-30cm), and the attribute field beginning with S_ indicates the lower soil attribute (30-100cm) (FAO 2009). The data can provide model input parameters for modelers of the Earth system, and the agricultural perspective can be used to study eco-agricultural zoning, food security, and climate change.

0 2020-06-08

The HWSD soil texture dataset of the Qinghai Lake Basin (2009)

The dataset is the HWSD soil texture dataset of the Qinghai Lake Basin. The data comes from the Harmonized World Soil Database (HWSD) constructed by the Food and Agriculture Organization of the United Nations (FAO) and the Vienna International Institute for Applied Systems (IIASA). Version 1.1 was released on March 26, The data resolution is 1km. The soil classification system used is mainly FAO-90. The main fields of the soil attribute table include: SU_SYM90 (soil name in FAO90 soil classification system) SU_SYM85 (FAO85 classification) T_TEXTURE (top soil texture) DRAINAGE (19.5); ROOTS: String (depth classification of obstacles to the bottom of the soil); SWR: String (soil moisture characteristics); ADD_PROP: Real (a specific soil type related to agricultural use in the soil unit); T_GRAVEL: Real (gravel volume percentage); T_SAND: Real (sand content); T_SILT: Real (silt content); T_CLAY: Real (clay content); T_USDA_TEX: Real (USDA soil texture classification); T_REF_BULK: Real (soil bulk density); T_OC: Real (organic carbon content); T_PH_H2O: Real (pH) T_CEC_CLAY: Real (cation exchange capacity of cohesive layer soil); T_CEC_SOIL: Real (cation exchange capacity of soil) T_BS: Real (basic saturation); T_TEB: Real (exchangeable base); T_CACO3: Real (carbonate or lime content) T_CASO4: Real (sulfate content); T_ESP: Real (exchangeable sodium salt); T_ECE: Real (conductivity). The attribute field beginning with T_ indicates the upper soil attribute (0-30cm), and the attribute field beginning with S_ indicates the lower soil attribute (30-100cm) (FAO 2009). The data can provide model input parameters for modelers of the Earth system, and the agricultural perspective can be used to study eco-agricultural zoning, food security, and climate change.

0 2020-06-08

The global soil dataset for earth system modeling (2014)

The source data for this dataset is derived from world soil maps and multiple regional and national soil databases, including soil attributes and soil maps. We have adopted a unified data structure and data processing process to fuse diverse data. We then used the soil type connection method and the soil variable line connection method to obtain the spatial distribution of soil properties. To aggregate these data, we currently use the area weighting method. The raw data has a resolution of 30 seconds, and aggregated data with a 5-minute resolution (about 10km) is provided here. There are eight vertical layers with a maximum depth of 2.3 meters (ie 0- 0.045, 0.045- 0.091, 0.091- 0.166, 0.166- 0.289, 0.289- 0.493, 0.493- 0.829, 0.829- 1.383 and 1.383- 2.296 m). 1. Data characteristics: Projection: WGS_1984 Coverage: Global Resolution: 0.083333 degrees (about 10 kilometers) Data format: netCDF 2. The data set contains 11 items of general soil information and 34 properties of soil. (1) The general information of the soil is as follows, the file general.zip: No. Description Units 1 additional property 2 available water capacity 3 drainage class 4 impermeable layer 5 nonsoil class 6 phase1 7 phase2 8 reference soil depth cm 9 obstacle to roots 10 soil water regime 11 topsoil texture (2) The 34 soil properties are as follows, files 1-9.zip, 10-18.zip, 19-26.zip, 27-34.zip Soil organic carbon density: SOCD5min.zip: No. Attrubute units Scale factor 1 total carbon% of weight 0.01 2 organic carbon% of weight 0.01 3 total N% of weight 0.01 4 total S% of weight 0.01 5 CaCO3% of weight 0.01 6 gypsum% of weight 0.01 7 pH (H2O) 0.1 8 pH (KCl) 0.1 9 pH (CaCl2) 0.1 10 Electrical conductivity ds / m 0.01 11 Exchangeable calcium cmol / kg 0.01 12 Exchangeable magnesium cmol / kg 0.01 13 Exchangeable sodium cmol / kg 0.01 14 Exchangeable potassium cmol / kg 0.01 15 Exchangeable aluminum cmol / kg 0.01 16 Exchangeable acidity cmol / kg 0.01 17 Cation exchange capacity cmol / kg 0.01 18 Base saturation% 19 Sand content% of weight 20 Silt content% of weight 21 Clay content% of weight 22 Gravel content% of volume 23 Bulk density g / cm3 0.01 24 Volumetric water content at -10 kPa% of volume 25 Volumetric water content at -33 kPa% of volume 26 Volumetric water content at -1500 kPa% of volume 27 The amount of phosphorous using the Bray1 method ppm of weight 0.01 28 The amount of phosphorous by Olsen method ppm of weight 0.01 29 Phosphorous retention by New Zealand method% of weight 0.01 30 The amount of water soluble phosphorous ppm of weight 0.0001 31 The amount of phosphorous by Mehlich method ppm of weight 0.01 32 exchangeable sodium percentage% of weight 0.01 33 Total phosphorus% of weight 0.0001 34 Total potassium% of weight 0.01

0 2020-06-04

The HWSD soil texture dataset of the North_Slope_of_Tianshan River Basin (2009)

The dataset is the HWSD soil texture dataset in the north slope of the Tianshan River Basin. The data comes from the Harmonized World Soil Database (HWSD) constructed by the Food and Agriculture Organization of the United Nations (FAO) and the Vienna International Institute for Applied Systems (IIASA). Version 1.1 was released on March 26, 2009. The data resolution is 1km. The soil classification system used is mainly FAO-90. The main fields of the soil attribute table include: SU_SYM90 (soil name in FAO90 soil classification system) SU_SYM85 (FAO85 classification) T_TEXTURE (top soil texture) DRAINAGE (19.5); ROOTS: String (depth classification of obstacles to the bottom of the soil); SWR: String (soil moisture characteristics); ADD_PROP: Real (a specific soil type related to agricultural use in the soil unit); T_GRAVEL: Real (gravel volume percentage); T_SAND: Real (sand content); T_SILT: Real (silt content); T_CLAY: Real (clay content); T_USDA_TEX: Real (USDA soil texture classification); T_REF_BULK: Real (soil bulk density); T_OC: Real (organic carbon content); T_PH_H2O: Real (pH) T_CEC_CLAY: Real (cation exchange capacity of cohesive layer soil); T_CEC_SOIL: Real (cation exchange capacity of soil) T_BS: Real (basic saturation); T_TEB: Real (exchangeable base); T_CACO3: Real (carbonate or lime content) T_CASO4: Real (sulfate content); T_ESP: Real (exchangeable sodium salt); T_ECE: Real (conductivity). The attribute field beginning with T_ indicates the upper soil attribute (0-30cm), and the attribute field beginning with S_ indicates the lower soil attribute (30-100cm) (FAO 2009). The data can provide model input parameters for modelers of the Earth system, and the agricultural perspective can be used to study eco-agricultural zoning, food security, and climate change.

0 2020-06-01

Dataset of soil texture on the Qinghai-Tibet Plateau (2010)

Soil data are extremely important at both global and local scales, and in the absence of reliable soil data, land degradation assessments, environmental impact studies and sustainable land management interventions are severely hampered。By Soil information data in the urgent need of the World, especially under the background of the convention on climate change, international institute for applied systems analysis (IIASA) and the UN food and agriculture organization (FAO) and the Kyoto protocol on Soil carbon measurement and the United Nations food and agriculture organization (FAO)/international global agriculture ecological assessment (GAEZ v3.0) jointly established under the sponsorship of a new generation of World Soil Database (Harmonized World Soil Database version 1.2) (HWSD V1.2). The 2010 data set of soil texture on the qinghai-tibet plateau was culled from the world soil database.Data format :grid format, projected as WGS84.The main soil classification system used is fao-90.Unique verification identifier of core soil institution unit: Mu_global-hwsd database soil mapping unit identifier that connects GIS layers. MU_SOURCE1 and MU_SOURCE2- source database mapping unit identifiers; SEQ- soil unit sequence in the composition of soil mapping unit; Soil classification system USES fao-7 classification system or fao-90 classification system (SU_SYM74 resp.su_sym90) or fao-85 (SU_SYM85). The main fields of the soil property sheet include: ID(database ID) MU_GLOBAL(soil unit identifier) (global) SU_SYMBOL Soil mapping unit SU_SYM74(FAO74classify ); SU_SYM85(FAO85classify); SU_SYM90(FAO90The soil name in a soil classification system); SU_CODE Soil mapping unit code SU_CODE74 Soil unit name SU_CODE85 Soil unit name SU_CODE90 Soil unit name DRAINAGE(19.5); REF_DEPTH(Soil reference depth); AWC_CLASS(19.5); AWC_CLASS(Soil available water content); PHASE1: Real (The soil phase); PHASE2: String (The soil phase); ROOTS: String (Depth classification of obstacles to the bottom of the soil); SWR: String (Characteristics of soil moisture content); ADD_PROP: Real (A specific soil type in a soil unit that is associated with agricultural use); T_TEXTURE(Topsoil texture); T_GRAVEL: Real (Percentage of aggregate volume on top);( unit:%vol.) T_SAND: Real (Top sand content); ( unit:% wt.) T_SILT: Real (surface silt content);(unit: % wt.) T_CLAY: Real (clay content on top);(unit: % wt.) T_USDA_TEX: Real (top-level USDA soil texture classification);(unit: name) T_REF_BULK: Real (top soil bulk density);(unit: kg/dm3.) T_OC: Real (top organic carbon content);(unit: % weight) T_PH_H2O: Real (top ph) (unit: -log(H+)) T_CEC_CLAY: Real (the cationic exchange capacity of the clay layer at the top);(unit: cmol/kg) T_CEC_SOIL: Real (cation exchange capacity of topsoil) (unit: cmol/kg) T_BS: Real (top basic saturation);(unit: %) T_TEB: Real (top exchange base);(unit: cmol/kg) T_CACO3: Real (top carbonate or lime content) (unit: % weight) T_CASO4: Real (top-level sulfate content);(unit: % weight) T_ESP: Real (top layer exchangeable sodium salt);(unit: %) T_ECE: Real (top-level conductivity).(unit: dS/m) S_GRAVEL: Real (percentage of bottom gravel volume);(unit: % vol.) S_SAND: Real (content of underlying sand);(unit: % wt.) S_SILT: Real (substratum silt content);(unit: % wt.) S_CLAY: Real (clay content in the bottom layer);(unit: % wt.) S_USDA_TEX: Real (USDA underlying soil texture classification);(unit: name) S_REF_BULK: Real (bulk density of underlying soil);(unit: kg/dm3.) S_OC: Real (bottom organic carbon content);(unit: % weight) S_PH_H2O: Real (base ph) (unit: -log(H+)) S_CEC_CLAY: Real (cation exchange capacity of the underlying cohesive soil);(unit: cmol/kg) S_CEC_SOIL: Real (cation exchange capacity of underlying soil) (unit: cmol/kg) S_BS: Real (underlying basic saturation);(unit: %) S_TEB: Real (underlying exchangeable base);(unit: cmol/kg) S_CACO3: Real (content of underlying carbonate or lime) (unit: % weight) S_CASO4: Real (substrate sulfate content);(unit: % weight) S_ESP: Real (underlying exchangeable sodium salt);(unit: %) S_ECE: Real (underlying conductivity).(unit: dS/m) This database is divided into two layers, in which the top layer (T) has a soil thickness of (0-30cm) and the bottom layer (S) has a soil thickness of (30-100cm).。 Refer to the instructions for other attribute values HWSD1.2_documentation.pdf,The Harmonized World Soil Database (HWSD V1.2) Viewer-Chinese description andHWSD.mdb。

0 2020-05-29

A China soil characteristics dataset(2010)

A multi-layer soil particle-size distribution dataset (sand, silt and clay content), based on USDA (United States Department of Agriculture) standard for regional land and climate modelling in China. was developed The 1:1,000,000 scale soil map of China and 8595 soil profiles from the Second National Soil Survey served as the starting point for this work. We reclassified the inconsistent soil profiles into the proper soil type of the map as much as possible because the soil classification names of the map units and profiles were not quite the same. The sand, silt and clay maps were derived using the polygon linkage method, which linked soil profiles and map polygons considering the distance between them, the sample sizes of the profiles, and soil classification information. For comparison, a soil type linkage was also generated by linking the map units and soil profiles with the same soil type. The quality of the derived soil fractions was reliable. Overall, the map polygon linkage offered better results than the soil type linkage or the Harmonized World Soil Database. The dataset, with a 1-km resolution, can be applied to land and climate modelling at a regional scale. Data characteristics: projection:projection Coverage: China Resolution: 0.00833 (about 1 km) Data format: FLT, TIFF Value range: 0%-100% Document describing: Floating point raster files include: Sand1. FLT, clay1. FLT -- surface (0-30cm) sand, clay content. Sand2. FLT, clay2. FLT -- content of sand and clay in the bottom layer (30-100cm). PSD. HDR -- header file: Ncols - the number of columns Nrows- rows Xllcorner - latitude in the lower left corner Yllcorner - longitude of the lower left corner Cellsize - cellsize NODATA_value - a null value byteorder - LSBFIRST, Least Significant Bit First TIFF raster files include: Sand1. Tif, clay1. Tif - surface (0-30cm) sand, clay content. Sand2. Tif, clay2. Tif - bottom layer (30-100cm) sand, clay content.

0 2020-05-28

Soil texture dataset of hwsd in Qaidam River basin (2009)

The dataset is the HWSD Soil texture data set of the qaidam basin. The data is from the Harmonized World Soil Database (HWSD) constructed by the United Nations food and agriculture organization (FAO) and Vienna institute for international applied systems (IIASA), which was released in version 1.1 on March 26, 2009.The data resolution is 1km.The main soil classification system adopted is fao-90.The main fields in the soil property list include SU_SYM90 (soil name in the FAO90 soil classification system) SU_SYM85(FAO85 classification) T_TEXTURE(top layer soil texture) (19.5);ROOTS: String(deep classification of obstacles to the bottom of the soil);SWR: String (soil moisture content characteristics);ADD_PROP: Real (specific type of soil in a soil unit related to an agricultural use);T_GRAVEL: Real (percent by volume);T_SAND: Real;T_SILT: Real (silt content);T_CLAY: Real;T_USDA_TEX: Real (USDA soil texture classification);T_REF_BULK: Real (soil bulk density);T_OC: Real (organic carbon content);T_PH_H2O: Real T_CEC_CLAY: Real;T_CEC_SOIL: Real (cation exchange capacity of soil) T_BS: Real (basic saturation);T_TEB: Real (commutative base);T_CACO3: Real (carbonate or lime content) T_CASO4: Real (sulfate content);T_ESP: Real (exchangeable sodium);T_ECE: Real.The attribute field beginning with T_ represents the upper soil attribute (0-30cm), and the attribute field beginning with S_ represents the lower soil attribute (30-100cm) (FAO 2009).This data can provide model input parameters for earth system modelers, and agricultural perspectives can be used to study eco-agricultural zoning, food security and climate change.

0 2020-04-06